ServicesResidential Plumbing
Residential Plumbing in Gallatin
Running toilets, stiff faucets, banging pipes and shutoff valves that won't turn. We find the worn part, show you why it failed and explain your repair and replacement options in plain terms, so you choose with the facts in front of you.
Everyday plumbing, with the reason behind every fix
Most household plumbing trouble comes down to a handful of parts: a cartridge or washer inside a faucet, the fill valve and flapper in a toilet tank, a pressure reducing valve near the main, or a shutoff valve that has sat untouched for years. Each one wears out in a predictable way, and each one usually has more than one fix.
Our job is to tell you which part failed, why it failed and what each option means for your home. A $1 part and a full fixture replacement are both real choices, and you should know the tradeoff before you decide. We write the estimate before the work starts, and it is free.
If something fails at 2 a.m., we offer 24/7 emergency plumbing service. For everything else, we schedule a time that works for you.
What our residential plumbing work covers
Faucet repair and replacement
Kitchen, bath and laundry faucets. Many drips come from a worn ceramic cartridge or rubber seat, which we can replace without changing the faucet. If the body is corroded or parts are no longer made, we explain why replacement is the better spend.
Toilet repair and installation
When a toilet runs or refills by itself, the culprit is most often a flapper that has lost its shape or a fill valve that keeps letting water in past its set level. We also reset toilets on a new wax ring and install new units, including comfort-height and dual-flush models.
Shutoff and supply valves
Older multi-turn stops under sinks and behind toilets often seize or weep when you finally need them. We replace them with quarter-turn valves and braided stainless supply lines, so you can stop the water quickly.
Water pressure and pipe noise
We test house pressure with a gauge at a hose bib. If it reads high, the pressure reducing valve may need adjustment or replacement. Banging when a valve closes is water hammer, which an arrestor near the fixture can absorb.
Outdoor hose bibs
Standard sillcocks hold water in the wall and can split in a hard freeze. A frost-free sillcock closes the valve inside the heated space, which protects it through winter.
Garbage disposals
Disposal swaps and new installs, including the electrical connection under the sink and the dishwasher knockout plug that is easy to forget.
Signs it is time to call a plumber
- The toilet runs between flushes
- You hear it refill on its own every so often. That is water slipping past the flapper into the bowl, and it shows up on your water bill.
- A faucet handle is stiff or won't fully close
- Mineral buildup inside the cartridge makes the handle grind or stop short. Moderately hard water in Middle Tennessee speeds this up.
- Pressure is too strong or too weak
- Spitting aerators, a pounding washing machine or a weak shower can all point to a pressure reducing valve that has drifted out of range.
- Pipes bang when water shuts off
- A sharp knock in the wall after the dishwasher or washer valve closes is water hammer. Over time it stresses fittings and fixture connections.
- A shutoff valve won't turn
- If you can't close the valve under a sink, you can't stop the water in a hurry. That is worth fixing before you need it.
How a residential plumbing visit works
- 1
Talk it through by phone
Tell us what you see and hear. We'll ask a few questions about the fixture and its age so we arrive with the likely parts on the truck.
- 2
Find the cause
We test the fixture, check pressure if it matters, and open the part that failed. You see what we found, whether it is a cracked flapper or a scaled cartridge.
- 3
Lay out the options
We explain each choice in plain English: repair the part, replace the fixture, or upgrade the valve. You get a written estimate before anything starts.
- 4
Do the work and clean up
We shut off the water at the nearest valve, protect the floor and cabinet, make the repair and test it under full pressure. Old parts leave with us unless you want to keep them.
What affects the price
We price most residential plumbing jobs by the part involved and how hard it is to reach, not only by time on the job. Before any work begins, you get a written estimate at no charge. We take cash and all major credit cards, and if a bigger repair or a new fixture stretches the budget, we can walk you through our financing options.
- Repair or replace
- A new cartridge or flapper costs far less than a new fixture. We tell you when the repair makes sense and when the fixture has run its course.
- Fixture you choose
- Faucet and toilet prices vary widely by brand and finish. You can supply your own fixture or have us source one.
- Access
- A valve behind an open vanity is quick. One buried behind tile, inside a finished wall or in a tight crawlspace takes more time.
- Condition of nearby pipe
- Corroded galvanized nipples or brittle old fittings next to the part sometimes need replacing so the new part seals properly.
- Timing
- After-hours emergency visits usually cost more than scheduled ones. If the water can be shut off safely, waiting until morning can save money.
Residential plumbing questions
- Should I repair my faucet or replace it?
- If the faucet body is sound and the maker still sells parts, a new cartridge usually brings back smooth, drip-free operation. Once the finish starts flaking, corrosion has worked into the base, or nobody makes the cartridge anymore, a new faucet is the smarter spend. We'll show you the old part and explain which way we'd go and why.
- Why does my toilet keep running?
- The usual causes are a flapper that no longer seals, a chain that is too short, or a fill valve set too high so water spills into the overflow tube. All three are inexpensive to fix. If the tank or bowl is cracked, replacing the toilet makes more sense.
- How much water pressure is right for a house?
- A gauge reading somewhere around 50 to 70 psi at an outside hose bib suits most houses. Pressure well above that range wears out valves, washing machine hoses and the relief valve on your water heater faster than it should. We put a gauge on the line, and if the number is off, we adjust the pressure reducing valve or replace it.
- Do you handle plumbing problems at night or on weekends?
- Yes. We provide 24/7 emergency plumbing service in Gallatin and nearby towns like Hendersonville and Portland. If the problem can wait safely, we'll tell you so you can schedule a regular visit instead.
- Can you install a fixture I bought myself?
- Yes. Have the box on hand so we can confirm it fits your rough-in and valve type. We'll point out anything missing, like the right supply line length, before we start.
Get a straight answer on your plumbing
Tell us what's going on and we'll explain the likely cause and your options. The estimate costs you nothing.